BeauProx Prime ZP – Zinc Phosphate Epoxy Primer

BeauProx Prime ZP is recommended as the standard heavy duty primer for suitably prepared steel surfaces in cement, refinery, textile, sugar, paper mills, and food and beverage plants including abattoirs, breweries and canneries. It also has a history of successful use as a high build priming system in the chemical power plants, oil fields, storage tanks, and in marine applications. Primer is normally over coated with epoxy or polyurethane finishes depending upon end requirements.
.
TYPICAL PROPERTIES
.
Classification Polyamide cured epoxy zinc phosphate.
Finish Semi-Gloss
Color reference Red Oxide, Grey
Components Two
Volume Solids 55±4% (Vary with color)
Weight Solids 70±4%
S. Gravity 1.40±0.05
Flash point 23oC (mixed)
Shelf Life 12 months
Wet Film Per Coat (80-90) Microns
Dry Film Per Coat (DFT) (45-50) Microns
Practical Coverage at Recommended DFT 11-12 m2/litre (Assumes no material loss)
.
CURING TIME
.
Touch 2 hours
Handle 16 hours
Recoat 16 hours
.
PACKING
.
Standard Packing Two Pack: A:3.64L, B:0.9L